EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
PROBLEMS WITH NOTCH FILTER AND PARAMETRIC FILTER
Someone found this error with SigmaStudio. I used these filters with ADAU1701 and both with SigmaStudio 3.15 used on WINXP, both with the latest version of SigmaStudio used with WIN10 Professional 64
-
Need assistance for development on SigmaDSP platform for a client
Hello, A client of mine who is into mass manufacturing of loudspeaker enclosures and a regional distributor of a popular car audio company wants me to develop a few audio products for him. Based on hi
-
[Bug Report] SigmaStudio DSP Readback via TCP (TCPIP1701) not working
SigmaStudio Version: SigmaStudio Version 4.1, Build 1, Rev 1761 (5/29/2108) Operating System: Windows 10 Pro (64-bit), Version 1803, Build 17134.191, German Problem Summary Signal Data Readback such a
-
How does the MCU control the ADAU1452
Hello!The target board is ADAU1452. My USBi communicates with the target board through SPI. I want to add MCU to implement the startup and control of ADAU1452.So which SPI interface should the MCU con
-
SSB MODULATOR UPPER AND LOWER SIDEBAND
Using an ADAU1701 I try to make an SSB modulator to obtain with the frequency of 32768 hZ 2 transmission channels Upper and Lower.sideband. Something does not work, surely the modulator setting is not
-
Hello! Where you can find a detailed description of the "Interface Write" and "Interface Read" units (IO -> Master Control Port) in SigmaStudio
Hello! Where you can find a detailed description and settings of the "Interface Write" and "Interface Read" units (IO -> Master Control Port; and IO --> GPIO --> Input/Output) in the SigmaStudio? And
-
how to used the watchdog counter in ADAU1452
hello, I want to set the "watchdog counter" to check if an errors would occus that the program does not finish intime for the next incoming sample. Here is my setting in SigmaStudio(V4.1): In the data
-
Can't Program the EEPROM ADAU 1701
Hello I'm desperate, I'm trying to get my own ADAU 1701 board working. From the voltage everything seems to fit. But i can't program The EEPROM. My schematic is on the attatchment. is there just a sim
-
How to configure the I2C master output in SigmaStudio?
I have ADAU1451. How to configure the I2C master output to send to it logic signal (0 or 1)? Or to send a state signal from the output of the "RMS limitter" unit to I2C master output? Audio Signal Pro
-
ADAU1701 dissipation
ADAU1701 rev. C datasheet ( http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1701.pdf ) has on page 6 wrong dissipation value ? May be misspelled number is 237mW instead of 286.5
-
How in the SigmaStudio program to convert the outputs of the states of several RMS-limiter blocks to one I2C output
How in the SigmaStudio program to convert the outputs of the states of several RMS-limiter unitsblocks to one I2C output?
-
DSP boards that support FxLMS filter for ambient active noise cancellation
I'm researching an ambient active noise cancellation (ANC) project and would like to better understand which DSP board(s) would be the best choice for this kind of application. SigmaStudio appears to
-
How can I check the working state of ADAU1452
During the ADAU1452 is working, I want to know whether the ADAU1452 is working normally or not. Is there some registers indicated the core state, whether the code overrun, whether the input/output spo
-
ADAU1467Z need
Hi, I would like to ask if I'm correct: buying the EVAL-ADAU1467Z (200$) and downloading the free SigmaStudio are enough to develop simple audio hardware applications (reverb, delay, filters...) ? Or
-
Question about saferoad address of ADAU1466
Hi all I have a question about saferoad address of ADAU1466 The development environment uses adau1466 / SigmaStudio 4.1. 1. In table 55 of the datasheet, I found the information about safeload address
-
Replaceable DSP Code Sections in ADAU1452 or ADAU1466?
I'm wondering if it is possible to have sections of DSP code reserved to be replaceable. Such sections would need to be identified such that the input and output connections are known. The code inside
-
ADAU1701 i2s slave input issue
I have finished a PCB application of ADAU1701 which is AUXin & a i2s in / 2 i2s output to a DAC . 12.288MHz mclk feed in to 1701 MCLKI and DAC MCLK in. a WIFI i2s master ( BCLK,LRCK,DATA)to 1701 i2s i
-
ADAU1701: How many instructions?
Hello, It's well known that some of the ADAU1701's 1024 instructions (at 48K sample rate) are needed for what's generally described as "overhead." Is there a better-defined answer for exactly how many
-
Any way to get ADAU evaluation board except buying?
Hello everyone, I have a question that is more or less described in the title. I am a software engineer, that like tinkering with devices and stuff, and sometimes I do have ideas of something that eit
-
opcode generation error
Hi, I'm using ADAU1446 Audio DSP. During connecting sigmastudio to HW, "opcode generation error" was occurred. When I tried "Link Project", No errors were occurred, but I tried "Link Compile Connect"
-
Is there an if statement in ADAU1701?
Hi, This may look silly but if there are any if statements in the ADAU1701 evalboard? I'm working on a project that needs to measure the input amplitude, and then according to the amplitude to select
-
An error in the Probe unit when working with the Parametric EQ unit in SigmaStudio
In SigmaStudio there is a unit Parametric EQ (Filters -> Second Order -> Double Precision -> Multichannel). It has the ability to adjust the frequency response for 15 frequencies. I have 3 chips: ADAU
-
I get the following error message when I link-compile-download. "System.componentmodel.win32exception (0x80004005): The system cannot find the file specified at system.diagnostics.process.startwithcreaterprocess(processstartinfostartinfo) at system.di
Could not find the folders mentioned in the error message on my pc.
-
I get this error message when I link,compile download. What is going on?
I get this error message when I link,compile download. What is going on? Edit Notes added text to description. [edited by: GenevaCooper at 9:51 PM (GMT -5) on 5 Jan 2023] software
-
Adau1761 stuttering?
Hello, I'm using the ADAU1761 codec in my custom board design. I followed all the design guides and wikis to integrate that component, and after a couple of minor software problems (i'm using Yocto Mo