Table of Contents
Log10
There are 2 versions of Log10 module.
- Log10 (Linear Interpolation)
- Log10 Accurate (Binary Algorithm)
Log10 (Linear Interpolation)
This Log10 algorithm computes the integral part of Log2 accurately. Fractional part of the Log is calculated using Linear interpolation. Then the Log2 is multiplied with Log10(2)to get the Log10. This algorithm takes less cycles and less accurate.
Input Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input Data | decimal - audio | Input data to be converted to Log base 10 |
Output Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Log value | decimal - control | log10(input) |
Log10 Accurate (Binary Algorithm)
This module uses a binary algorithm to compute the Log2. Then the Log2 is multiplied with Log10(2)to get the Log10. This is more accurate and takes more cycle. Number of iterations in the algorithm can be configured. Accuracy of the algorithm increases when the number of iterations is increased.
Input Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input Data | decimal - audio | Input data to be converted to Log base 10 |
Output Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Log value | decimal - control | log10(input) |
Configuration
Right Click on the module to configure the number of iterations.
