EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
ADAU1451 EQ ADDRESS
Hi, I have a problem when load the EQ parameters on ADAU1451. I build a 28 band EQ. T The first parameter address is: 0x002B //DM0 The second parameter address is: 0x600E//DM1 The third parameter addr
-
ADAU1701 ADC noise - even with new design
Hello everyone, I have some problems with noise from the ADCs at my ADAU1701. We started making products (e.g. active speakers) with this DSP several years ago, but we always had problems with input n
-
ADAU1452 sample rate in out
I use a ADAU1452. I need to deliver a i2s signal to an outside device that is also on the same master clock. The outside deliver to the ADAU1452 the LRCK and BCLK, and this unfortunately cannot be cha
-
How to design Shelf and Butterworth HP or LP 6db/oct, 12db/oct filter?
Hello everyone, I search the SigmaStudio wiki, and I still not figure out how to make a filter that contain db/oct design If I want to design a High or Low pass Shelf / Butterworth filter with db/oct
-
Delay SPI Slave Port Parameter Update ADAU1452
Hello EngineerZone, i searched for a similar topic but i can't find one that is equivalent to my problem, so i add a new question. At the moment i used the SPI port from my mikrocontroller (STM32F4...
-
1701 LOW POWER MODE?
I have a standby mode where I need to minimize power consumption. I don't need D/A or AUX A/D while in standby, but they need to be enabled when leaving standby. Using 1701 in Standalone mode, no micr
-
Reducing unneeded memory use
I've noticed that when compiling projects in Sigmastudio, the output .h header files are always padded to the full memory size, regardless of what is actually used. For example: #define PARAM_SIZE_IC_
-
ADAU1452 EVAL @192KHz using I2S
Is it possible to use I2S in and out to bypass the codec limitation restricting ADAU1452 eval board limiting audio 48Khz ? Audio Signal Processors adau1452 SigmaDSP Audio Processors
-
Maximum audio frequency with EVAL-AD1940MINIB
Hello, The settings for the sampling frequency are up to 192 [KHz] from SigmaStudio but when changing it nothing happens. So I want to know what the maximum frequency is to work with external signals
-
Problem with ADAU1452 and External SPI Delay @96Khz
Hello everyone, I'm developing an application using ADAU1452 and Sigmastudio 3.14. I'm trying to use External Delay Block but unfortunately it seems that there is no way to use that block with a syste
-
ADAU1701 fast config change
In a design an ADAU1701 is connected to a microcontroller. For changing for instance the threshold of the audio compression currently 50 byte has to load via MCU to the ADAU1701. This needs some time.
-
ADAU1452 How to transfer the length to delay time?
Hi all, I saw some products that have one function like "length correction" I guess this is use on two different length source line, and two device output will delay, so there is one function: choose
-
The theory of “Compression Ratio“ in“”Dynamic bass boost “of ADAU1701?
How different raito values will have an effect on the output?some more detailed explanation,Thanks! Audio Signal Processors SigmaDSP Audio Processors adau1701 sigmastudio adau1701
-
No slew stereo mux bug
Hi, I found a mux problem. (ADAU1452 EVM and SigmaStudio V3.14.1) The Nx2-1 moudle in the layout. Whether the choice is 1,2,3,4 or 5 the output L/R is not correct. (Muxes/Demuxes -> Multiplexers -> Sw
-
Sigma Studio IC-1 address incorrect
The 1701 literature (page 23, table 16) reports a bunch of device addresses with the address and R/w# combined. This is wrong, as the address is 7 bits not 8. If addr0 and addr1 are tied low, the devi
-
External Mute Button
I got a ADAU1452 Eval Board and can't seem to figure out how the GPIO's configure on it, There's not much documentation on it in Help, I just need to do a simple External Mute Button on one of my Audi
-
SigmaStudio Parameter Table
Hello, I'd like to know whole parameter table in exported files by Sigma Studio. There are many files and parameters in exported items by Sigma Studio. Although, I don't konw the purpose of almost par
-
ADAU1452 with USB Amanero384 and out with FIFO PCM1704 DAC
Hi! My project ADAU1452 as two way crossover: Input USB Amanero I2S out (MCK, LRCK, BCK, and DATA) to I2S in2 of ADAU1452 eval board. I2S out1 and I2S out2 to FIFO(74HC164) boards then to PCM1704(only
-
Differential input for ADAU1701 ADC
Hello to all ADAU1701 fans, I would like to share a very simple circuit for expanding the standard audio ADC input to a fully differential input path. It works very well and rises the SNR (in my hardw
-
ADAU1701 multipurpose pin configuration
Hi, community, I tested very simple configuration of ADAU1701 - just one sine source routed to DAC0 output. I found out, that output signal disappears, as soon as MP5 (physical pin 9) configured as BC
-
DSP with Audio Codec
Hello, We have come across a requirement to have a DSP with the Audio Codes that can take the MIC input and provide the normalised (0dB) peak output on LineOut. The main DSP functions required are, -N
-
Output from a Hilbert Transform
In SigmaStudio, I have a 1401 selected. If I have a stimulus passing through a Hilbert transform, and probes connected to the two outputs, I get no results. No signal passing through the path with the
-
ADAU1452 IOVDD and PVDD Sequence
Hello, ADI Support Team I could find the description of Power Up Sequence in ADAU1452 Datasheet as follow. <Page 24> All power pins can be supplied simultaneously. <Page 25 & Page 26> If possible, app
-
Custom design with ADAU1701
Hi, Planning to use an ADAU1701 as an active crossover (3-way) as a first project. I have several questions: 1) What is the work flow when designing one's own custom board with an ADAU1701? From the e
-
SigmaDSP ADAU1452 linux driver
Hello, I'm trying to set up a Raspberry Pi with an ADAU1452 chip working as an I2S codec for audio I/O via the Pi's GPIO pins. The ADAU1452 chip is on an eval board EVAL-ADAU1452MINIZ. Is there a linu