EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
BUG Report - redefined constants in *_PARAM.h
I'm finding that this bug still exists in 3.10 , running to an ADAU1701, reported four years ago. https://ez.analog.com/message/19580#19580 Same block. It looks like the #defines are not labeled corre
-
problem reading/writing from interface registers on ADAU1701
Hi forum, I am having a hard time with working with the interface registers of an ADAU1701. Trying to understand how they work, I have implemented a very simple design in SigmaStudio and using it on a
-
AudioEPS for Windows 10.
Hi. Where can I download the SoundMax latest drive update? Because it's AudioEPS is not intended for Windows 10. Thank you. windows 10 windows 10 audioeps soundmax
-
Attack time and Release time of Volume module for SigmaStudio
Hi, ADI Support I have a question about SigmaStudio Module. I'd like to know an attack time and a release time of "Single SW slew vol" module. I read a help of SigmaStudio, "Single SW slew vol" can se
-
How to do a "Squelch" implementation in SigmaStudio
Hello forum members, I turn to you guys hoping someone has come across this before me, and has come up with an implementation.... My system consists of an ADAU1452 DSP core and a couple of AD1938 code
-
sigma studio rms table
Hi all How do I calculate the value of the RMS TC (attack) and the Decay value in real time? what is the formola requiered . And what are the last 2 values in the RMS table data structure how do I cal
-
ADAU1701 IBIS Model
Is an ADAU1701 IBIS model available? Audio Signal Processors SigmaDSP Audio Processors adau1701
-
ADAU 1761 Problem
Hi all, I would like to use the ADAU1761 with the DSP BF707. I receive data from the UART from a WifiModule. I write the data in a circular buffer and this data is reproduced with ADAU1761. The progra
-
ADAU1761 - Maximum value for Digital Input / Output
Hi, I wanted to transmit some kind of time count (time/Fs) through a Digital output to have this same time signal in a following DSP, but apparently the Maximum value for Digital inputs is 1? I would
-
DC Input format for Index Selectable Filter in ADAU1452?
Hi All, I have tried to implement ISIB (Index Selectable Ind. Band Filter) in ADAU1701 and I have no problems with it. Now, it seems like the ADAU1452 DC block input is causing confusion on the filter
-
SigmaStudio Schematic Problem
Hello! I have a big problem with my SigmaStudio schematic at the moment. I made a schematic for a 4-way loudspeaker on our custom board with the ADAU1446. It worked very well in different variants and
-
SigmaStudio 3.11 + ADAU1452 - EEPROM settings ignored
Hi, I've designed a project based on ADAU1452 in Selfboot configuration. I wanted to use an 25AA512 which is cheaper than 25AA1024 (used on ADAU1452 Evalboard). This EEPROM also fulfills all requireme
-
ADAU1761 - Microcontroller integration, Help needed!
Hi, I have some weird problems reading some outputs using DSP readback or Level detectors after I export my SStudio files for my microcontroller to bootup the DSPs. When I compare the outputs of my Le
-
ADAU1701 audio ADC noise
Hi, I found there is big noise in ADAU1701 audio ADC. I set the ADC current is near 100uA rms, according to the datasheet. Please give me a hand on how to use ADC of ADAU1701. The noise is really quit
-
Remembering NLMS block values.
I have a NLMS block in use in my project on a ADAU1761. This seems to work fine. The block learn about the reflections it should cancel. But after a reset this learned information (filter coefficients
-
Register with SigmaStudio
Hi Evryone, I want found the register for every block in sigmaStudio who i can do it ? i found for the one 0X0000 after 0x0001 it's true ?Because i want change value in the register with my arduino .
-
ADAU1761 TDM8 audio slots
I have an ADAU1762 set for TDM 8 mode. According to the data sheet audio is transmitted out in order slot 0,1 2 etc to 7. What I have is coming out in the following order:- DIg 0, Dig 2, Dig 4,Dig 6,
-
Readback block data format
I have a DC block in 5.23 format connected to a readback block whose default format is 5.19. I can change the format of the readback block in SigmaStudio to 1.23. However, when I write a 5.23 value to
-
Intel Hex or some other useable file format?
Hi, I am trying to output the EEPROM data from SigmaStudio into some format ( ANY format ) that is recognisable by either my eeprom programmer or a file format convertor. The .hex files output by Sigm
-
Clocking ADAU1772 other than 24.576 or 12.288 MHz
Hello, I am looking for the consequences of clocking to ADAU1772 with an external crystal that is 24 MHz (easier to for me) without using the PLL (to save power). Are there any consequences other than
-
SigmaStudio with Windows 10 and USB 3.0
Hello, Although https://ez.analog.com/message/130650#130650 suggests that SigmaStudio may run on Windows 8, the wiki reports: In addition, the EVAL-ADUSB2EBZ (USBi) can only use USB 2.x ports. Meanwhi
-
ADAU1442 Level Detector on Input Ports
To Whom it May Concern, Looking for some info on the Level Detector feature in the ADAU1442. In my current application, the Level Detector detects audio input on Port2, but not on any other active Por
-
SigmaStudio 3.12.1 Memory Footprint
I have been using the SigmaStudio 3.12.1 beta for a couple months with very good success. It works very well, except for one annoying difference. When I transitioned from 3.11 to 3.12 I noticed a sign
-
Multichannel Delay capability of ADAU1452
To AD support team, Does this single chip supports multi channel delay, say 0-200mS variable delay per channel in a 8 channel output configuration using external memory, or the delay function is limit
-
PWM clip LED
Hi I'm trying to implement a clip led on the 1701mini dev board. I found the following threadMonitoring average and instantaneous signal levels which works but it's an instant on/off led. I'd prefer s