EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
about Low-Shelf filter coefficient calculation
alpha = sin(ω0)/2 * sqrt( (A + 1/A)*(1/S - 1) + 2 ) I want to ask this 1 / S, S how to get this
-
uC Control of the ADAU 1702 Eval board
I've been troubleshooting this eval board using the EVAL-ADAU1401AEBZ evaluation board manual and have come up with a couple unanswered questions when attempting to boot the board using a microcontrol
-
Licensed algorithms for ADAU1701
Hi, I would like to test and evaluate the following two licensed algorithms in my speaker project: (1) Wow HD from SRS (is this available for ADAU1701) (2) TruSurround XT from SRS (is this available f
-
ADAU1701 hardware config for SPI boot from uC
I need to implement loading of ADAU1701 DSP program via SPI control port. I have microcontroller code that takes the CLATCH pin lo-high 3x to put the device in SPI mode, and I have verified that the t
-
back to echo cancellation
I know that this subject came up many times on this forum. Nevertheless I could not find any information on successful implementation of an echo cancellation for Sigma DSPs. I am trying to do it on AD
-
ADAU17xx Sigma DSP Readback cell inconsistent read with MicroController
Hi, I can read a fixed DC source value (positive and negative) with my MicroController by using a DSP readback block. I can also read a sinus output in the MicroController using the DSP readback. BUT,
-
Can the ADAU1401A have dual sampling rates
We want to be able to sample in I2S data at one sampling rate, do some processing, and also output the audio stream in a different independent sampling rate. It looks like this is possible through the
-
Is there any documentation for the ADAU170x's Log Lookup Table?
Hello, The Log-spaced Lookup Table is a welcome addition to the ADAU1701 toolbox -- it can simplify audio control or measurement where a large dynamic range is needed. Unfortunately, I cannot find any
-
Level detector designer coefficient
Hello, I would like to apply level detector designer module(Pass Thru type) on ADAU1761. The module has 5 changeable parameters, Center Frequency, Bandwidth, Q, Time constant and Decay. When I change
-
Pitch transposer for ADAU1452
Hello, One of my customers has used ADAU1701 before. Now he is evaluating ADAU1452 for his new project. But he found that the pitch transposer or pitch shifter in Sigmastudio is no longer available fo
-
Anyway to download program to ADAU1761 with small-RAM size micro controller?
I had ever been successfully downloading several smaller programs into ADAU1761 and all they worked fine. And now I had finally completed the dsp code of ADAU1761 which used almost all its on-chip res
-
Does Analog Devices have a vocoder?
We have an Invensense INMP421 that is planned to go to an ADAUl7002 to get to I2S communications. We want to use a vocoder and would like to know what is compatible with this setup. Thanks, Dan
-
SigmaStudio 3.12.1 request
Hi, looking for SigmaStudio 3.12.1 beta for evaluating ADAU1452. There are some new long desired algorithm for the 145x family that can simplify our signal flow. Kind regards, Lasse Audio Signal Proce
-
ADAU1761 Program load problem
Hi all, I run into a situation when doing system implementation to load the program code and other registers from the MCU, however, because of some stupid constraints in the MCU, I had to load the pro
-
RMS compression curve vs PARAM file values
Hello all, I am using AD ADAU1452 DSP in multimedia system and need to control the compression curve of the RMS limiter while the system is running (accessing the registers of the DSP via SPI). I am u
-
ADAU1452 and 16-bit I2S
Hello, I am using 2 WM8804 spdif transceivers interfaced to the 1452's Serin2 and Serin3 ports and routed through the ASRCs. The input ASRCs are configured to get signal from their respective serdata
-
Could the Sigma Studio link-compile with visual dsp++?
HI, I need to compile a program based on C language to apply in sigma DSP ADAU1401. However, the Sigma Studio only support graphic program. In the Sigma Studio, there is Link-Compile in "Tools" menu.
-
ADAU1452 / ADXL 345
I'm intending to evaluate the ADAU1452 MINIZ Eval Board, working with an analogue microphone and analogue / digital Accelerometers. Is it possible to connect 2 of the 3 axis of the digital acceleromet
-
How good is sigma-studio and ADAU1446?
Hi, The aim of my project is to eliminate background noise from a microphone. The microphone will be used near busy traffic and I have tried to use a variety of ways to eliminate the background noise,
-
Ethernet control.
Hello, I'm looking into the possibility to get someone to construct a page to allow the end user to connect to ADAU145x via ethernet connection in order to set up parameters, not necessarily in realti
-
ADAU1701 with SigmaStudio
Hi evryone, I have a minidsp with a ADAU1701 processeur and i want to connect my processeur to the sigma studio how i can do it ? and sigma studio can be connected only with Evaluation Carte wirh USB
-
I2C can't communication for ADAU1761
Hi Guys, Sorry to describe my issue by pool English. I using ADAU1761 to design an audio functional PCB. Basically I follow the demo board schematic to design my PCB. I got PCB and solder components l
-
New system with ADAU1446 and ADAU1372
Hi All, I am looking for some guidance and confirmation on a proposed new system. I currently have a design that is quite sophisticated in its implementation and requires the utmost in signal fidelity
-
How can I reset the rotary encoder position to different values ?
Hi all, in my project I am using 2 buttons and the rotary encoder to control the parameters (Q, gain and f) of 3 filters (HP, LP and BP). I have already achieved the logic in SigmaStudio in order to d
-
my USBi "locks" during "Link Compile Download"
Hi everybody, I have a problem with a new simple board with an ADAU1701. I'm trying to control it with an USBi (I have both version 1.2 and 1.3). When I perform a "link compile download" it looks like