EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
Lookup table and volume
Hello, It's been 2 days I've been trying to use a rotary encoder as volume control for a ADAU1701… without success. I first tried to use the dedicated rotary volume control. The only time I got it wor
-
ADAU1701 Instruction Usage Table
Several designers have recently asked about how to estimate instruction usage by various algorithms on the ADAU1701, since its compiler does not itemize instruction usage by individual blocks. The att
-
Max FIR size for ADAU1452?
I'm considering using the ADAU1452 for an audio product we are designing. We have audio stream at 96KHz. What is the maximum size of FIR filter I can use with this device (for this stream)?
-
Avoiding SRC with ADAV4601
Hello, Provided that there are no downsides to using the ADAV4601 at 192KHz: I would like to use the WM8805 in HW mode with its digital audio interface port configured as master. In the HW mode the WM
-
I2S audio input, DAC output
Hi, is it possible to program the ADAU1701 for using I2S audio input toward DAC as output? And with ADC input toward I2S output? Regards Audio Signal Processors i2s input SigmaDSP Audio Processors ada
-
adau1701 board
anyone try this board ? Free Shipping 1pc ADAU1701 module electronic frequency Digital Audio Processor Module-in Other Electronic Components fr… Audio Signal Processors SigmaDSP Audio Processors adau1
-
Sampling frequency of ADAV4601
Hello, I am near completing my board using WM8805 (in HW mode) and AD1895 interfaced to BCLK1, LRCCLK1, SDO0 and SDI0 of the ADAV4601. The system documents mentions the following: 1. The ADAV4601 inte
-
ADAU1701 AUX ADC numeric range
Hi, I want to connect the output of an AUX ADC IN to a "Linear Interpolator" object. What are the values to write in "Max" and "Min" to cover the full range of the AUX ADC object output? In other word
-
1452 SPDIF Problem
Hi, I use 1452 on my target board.The output of I2S is normal when the input is from SPDIF receiver and the room temperature is 20~25℃.But The output of I2S starts to be abnormal, even no output ,when
-
Trouble running the ADAU1701 at 192kHz
I know I have to be doing something wrong here, but I've looked at all the relevant documentation and searched the forum, but can't find what I've overlooked. I'm running Sigma 3.9, if that matters. I
-
ADAU1701 Resources Display
The compiler output file for the ADAU144x (and probably others) gives a nice tabulated listing of the resources used by each functional block that has been pulled into the schematic. I can't find this
-
Understanding S5 switch on ADAU1701-MINIZ
Dear friends! I'm quite new to the ADAU family of devices, so probably I'm going to ask some long-before-answered questions just due to lack of skills in web search, but, sorry, here it goes anyway) W
-
MIPS estimation for ADAU1701
I’m using an ADAU1701 part for an application splitting 3 digital I/P channels of into 6 channels then following with speaker crossover filtering with appropriate low pass/high pass filtering for dist
-
ADAU1452 How to use the SafeLoad mechanism
I am using the ADAU1452 and wonder how to use the SafeLoad mechanism. With the ADAU1442, AD1940/1 it works perfectly. So it seems to be easy to adapt it to the ADAU1452. Except that i can not get the
-
adau1701 on LED
hi : I have project at adau1701, The funcional requirements is when analog signal input ,External leds via GPIO to control. LEDS exhibit of lanterns with the size of the input analog signal to flash,h
-
ADAU1442 serial input routing problem
Hello. I have ADAU1442 with 6 serial input, 0,1,2 for WM ADC, 3,4,5 for WM8804 SPDIF receiver. Project has only one Master output for DAC. I need use ASRC for each input channel, but after configurati
-
Sigma has stopped working
Hello, I'm running SS3.10 on windows 7 and it has suddenly started going wrong. It will not even boot up instead I get a message flash on the screen that says: "Sigma studio development environment ha
-
Inputs and Outputs Muted on EVAL-ADAU1401AEBZ
Hello, I am a student working on creating a 2 input 4 output DSP amplfier system and I can't seem to get past the first main hurdle: getting audio into and out of (ignoring filters for now) the board.
-
ADUA1772 confusion with SigmaStudio Inputs and Outputs.
Hello, I am a bit confused with signal flow in my project. The signal source is audio from PC. Here is my signal route: I created Schematic like that I have heard sound only in my right earspeaker (th
-
ADAU1701 (EVAL-ADAU1701MINIZ) i2c write issue
Hello everybody! I am tryng to use a TI MSP430F6638 microcontroller to comunicate via i2c with my EVAL-ADAU1701MINIZ. I set the i2c rate at 400KHz, and I placed two 2k2 resistors connected to 3v3 to p
-
Beamforming with sigma DSP
Hi, I have a plan to use ADAU1761 for the beam forming with 3 mic array (2 digital MEMs Mic + 1 Analog Mic). My position of mic would be as attached. All the mic would be facing end customer and consi
-
NLMS Block for ADAU1452?
Hello there, SigmaStudio's 3.11.1 beta have this NLMS block for ADAU1452 but seems it is not functioning well. Pin0 and Pin1 are inverted, I believe, and there is no TC in in ADAU1452 as compared to t
-
SigmaStudio limiter block bug
Hi guys, I think I might have found a little bug in SigmaStudio. I am using version 3.11.1. The RMS limiter block can output, apart from the audio signal, the miniting ratio as well as a FLAG when the
-
ADAU1701 I2S Cubieboard or Raspberry Pi
Hello, I need to use ADAU1701 as DSP with Cubieboard or Raspberry Pi, by I2S port. Have someone ever done that? I appreciate any help Audio Signal Processors adau1701 cubieboard raspberry SigmaDSP Aud
-
ADAU1701 DSP Cubieboard or Raspberry
Hello, I need to use ADAU1701 as DSP with Cubieboard or Raspberry Pi, by I2S port. Have someone ever done that? I appreciate any help Audio Signal Processors adau1701 cubieboard raspberry SigmaDSP Aud