EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
ADAU1787 DMIC input noise floor increase high
Hi Guys, I use AP to test the DMIC input path, AP generate a PDM signal to ADAU1787 DMIC input and monitor the HP out. I find that the noise floor increase high when using a PDM signal above -7dBFS. T
-
ADAU1452 SigmaStudio 4.1, detail information about Beam Forming Designer
I use the ADAU1452 with the Sigma Studio ver.4.6. I use 2 microphone beamforming this function, but the actual measurement is different from the above field type, what could be the problem? My hardwar
-
ADAU1467 AEC project incomplete pages
I downloaded ADAU1467 AEC for testing from your website: https://wiki.analog.com/resources/tools-software/sigmastudio/tutorials/aecnrexamples Unfortunately, when I opened the project, I found incomple
-
Getting Started with ADAU1467 Evaluation Kit
Hi, I am a noob here. I have a ADAU1467 Evakuation Kit and I am using it very first time. I have searched all the links in the analog devices website and google but nothing got productive to getting s
-
ADAU1467 - Unable to hear audio out of the eval board.
Hi, there I am noob here I just bought a ADAU1467 evaluation kit and tried running examples which are given in sigma studio, but I am not able hear anything in the headphones. My setup is shown in pic
-
Getting Started with ADAU1467 Evaluation Kit
Hi, I am a noob here. I have a ADAU1467 Evakuation Kit and I am using it very first time. I have searched all the links in the analog devices website and google but nothing got productive to getting s
-
ADAU1452 devkit and Raspberry as I2S Master
I have added my project. The frist challenge ist to route the signal from SIN3 to SOUT0. The signals of SIN3 are in the screenshot and are driven by the Raspberry. SOUT is connected to a DAC of DevKit
-
ADAU1467 - Suppression of Mechanical Noise and use of two microphones
Hi all, I want to achieve the effect of active noise cancellation (ANC) for the recognition of the human voice with mechanical noise from machine tools and engines (according to the design of the post
-
ADAU1466 + ESP: Readback LevelRTA
Hi All, I am working on a DSP solution where i use ESP32 to fully control the ADAU1466 @ SPI. I have many basic functions working and now i would like to provide input and output levels to the web int
-
How to isolate 1 KHz signal by using FFT algorithm on ADAU1452
Hi Team, We are using EVAL-ADAU1452 to come out a schematic to isolate 1 KHz signal by using FFT algorithm. Please advise tech info and references. regards, ping Audio Signal Processors adau1452 adau1
-
Verifying ADAU1701 input and output levels?
Hi all, I've been using the ADAU1701 chip in a speaker project and for the most part things are working as expected however the audio seems to get attenuated on the output ( only able to confirm this
-
IK Iloud mm with Adau1701 and nuvoton N79E815AT28 uP
Somebody can help to understand why my Iloud MM doesnt start properly? It has a nuvoton up, an eeprom 24c64 and ADAU1701. SDA and SCL signal are present, but at power on, it doesnt set the program and
-
ADAU1787 - Import/generate custom FIR filter coefficients
Quick questions before learning a new tool and starting development with ADAU1787 eval board using Sigma Studio (never used this tool before). I want to set up a 1-channel mono (microphone) - input, a
-
ADAU1462-150, Downsampling and Compiler Report
Related to my questions in [ADAU145x] Downsampling to arbitrary value and the comments regarding usable MIPS here Cannot find the ADAU1462-150 in the part library list ... I'd like to get some more cl
-
Cannot find the ADAU1462-150 in the part library list
Hi Dave, I used the default settings for adau1462-150 but it didn't work. I can only see the MCLK output but nothing else happened. I just dragged adau1462 from the processor list and put the input/ou
-
ADAU1452 ASRC lock status inconsistent
Hello! I am using an ADAU1452 for playing sound off a TI PCM2707 USB -> I2S bridge. For automatic channel switching and automatic mute, I employ the ASRC lock register (0xF580). With it, I check the s
-
ADAU 1787 TDM IN/OUT
Hi, I have an EVAL-ADAU1787Z dev board, I connected it to a TDM device that generates LRCLK and BCLK for 44100 Hz. I'm struggling to make the TDM in SPT1_OUT working. I managed to make the SPT1_IN wor
-
request information about sigmadsp (adau1467)
dear When I was using adau1467, I found a problem, it is about acoustic echo canceller module,just as below: ##### Compile Started: Saturday, January 29, 2022 5:46:48 PM ##### error (242,RES low): Lab
-
AN ADDRESS ERROR OTHER THAN 0X68
Hello, there. I can't run ADAU1701 at a different address than 0x68. The hardware is the same. I'm just changing the link to the address pin. It doesn't work. The Sigma studio device is not connected
-
2 ADAU1701 AND 1 1 I2C LINE
Hello, there. The card I designed includes 2 ADAU1701, 3 tanae EEPROM and 1 processor. They are on the only I2C line to communicate with each other. I've made and run software for 1 Adau in the Sigma
-
RESOLVED: Unable to open HiFiBerry .dspproj files
I have just installed SigmaStudio 4.6 from the Analog website. I am trying to open .dspproj files provided by HiFiBerry at https://github.com/hifiberry/hifiberry-dsp/tree/master/sample_files/dspproj.
-
ADAU1761 pops at power switch
There is a problem with our use of ADAU1761, which is detailed as follows: There was a relatively obvious POP sound in the system during power-on and power-off. After investigation, it was found that
-
SigmaStudio crashes on TCP communication with ADAU1451
I am running SigmaStudio 4.6 Build 0. Rev 1812 on Windows 10 Home 19043.1466 64-bit. Having just done a fresh install of SigmaStudio, I created a new project. I added my ADAU1451 and TCP communication
-
Register description for ADAU1451
I am working with the ADAU1451 on some DSP applications. Where can I find a document describing the full set of parameters that can be configured in the register, listed with parameter name, memory ad
-
Connecting two ADAU1701 via i2s
Hello everyone, I want to connect two ADAU1701, one as a master and one as slave. I've choosen i2s and tried out the project Dave suggested in this post. The loopback works great on one board. If I pr