EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
Multirate / hierarchy board and sampling rate error
Dear, I'm doing an audio DSP with filters, compressors etc. with SIgma Studio v4.6, on the ADAU1452. At first, I had a script entirely written on the main board, with multirate processing and it was w
-
ADAU1467 as de-click and denoise/dnr filter for audio
Hi there, I'm working on a project where I need to implement a real-time de-noise filter with externally controlled strength, and a de-click/de-pop filter with externally controlled strength. Up to no
-
Is PLL filter always needed in ADAU1978?
I started right now to design a board with the ADAU1978. In the current design, a microcontroller generates all the I2S signals, included master clock. The question is: can I supply ADAU with all the
-
Parametric EQ missing from ADAU1452 in SigmaStudio 4.6 and AutoEQ parameteric EQ not working either.
Hi Everyone, I am working on a loudspeaker system using the ADAU1452. Previously we had used the ADAU1701. Although the Parameteric EQ is available in SigmaStudio for the ADAU1701 under 2nd order->Dou
-
ADAU1452, Serial Port, Master Mode syncronous
Hi, I have an odd requirement. I am using an ADAU1452 (SigmaStudio V4.6) and I want two of the output serial ports to generate their own output clocks on LRCLK_OUT0(1) and BCLK_OUT0(1) pins; but I wan
-
Selfboot Problem on ADAU1452
Hello, when I download this simple test project "write latest compilation to DSP" it works fine . Check latest Compilation through DSP workks 100% But if I disconnect the PC and reboot the board it do
-
latency in ADAU1772
Hello, i'm using AUAU1772 in my ANC project. To measure system internal latency, i wrote a program in host(TI-C6748,McASP interface) which generate a digital sine signal and transfer it to 1772 using
-
Sample rates for audio DACs
I have been wondering why Audio DAC’s have so many sample rates , available and the quickest is 192kSamples The max sample rate is 192kSamples wich is approx. 4,8 X Nyquist sample rate I have had a th
-
how to write program of dsp 1701
hi erybody i need example program i want to write same that , i need put limiter for out port. thank alot
-
Limiter shows weird behaviour after Reset in ADAU1452
Hi, i am using a limiter in an ADAU1452 hardware project. After every reset of the adau1452 and loading of the dsp programm and parameter the limiter starts with <-70dB gain and then slowly over sever
-
Creating audio algorithms for the ADAU1466
Hi, May I get some advice? Can I create my own algorithms for the ADAU1466 not only in the Algorithm Designer for SigmaDSP? Thanks, Yevhenii Audio Signal Processors sigmastudio SigmaDSP Audio Processo
-
ADAU1452 maximum self-boot image size, and sharing EEPROM
Hello, I'm having some trouble determining the worst-case self-boot image size which could be possibly generated by SigmaStudio for the ADAU1452. If I add up the total size of DM0, DM1 and program spa
-
EVAL-ADAU1467Z - writeback circuit purpose
Hi there, Sorry for this simple question. But I am again reviewing the EVAL-ADAU1467Z schematic and I don't really understand the purpose of the writeback sub-circuit and its subsequent connection to
-
DSP volume control or DAC volume control - which should I use?
I am using ADAU1452 for crossover and EQ functions, then I reclock the signal with a FPGA reclocker, then send the signal to two AK4490 DACs, which have built-in volume control and operate on 32bits.
-
Cannot connect Aardvark I2C with SSM3582 in SigmaStudio
I am trying to connect the I2C port of an Aardvark to the I2C port of the SSM3582 in the HardwareConfiguration - Config tab of SigmaStudio 4.6. While that does work with the USBi, the port on the SSM3
-
How to eliminate feedback in Sigma DSP ADAU1452
HI everyone I have the same problem with https://ez.analog.com/dsp/sigmadsp/f/q-a/64300/how-to-eliminate-feedback-in-adau1701/193164#193164..But our DSP is ADAU1452.There are some tool and function.AD
-
ADAU1787 & NLMS component
Hello is it possible to add the leakage factor to the NLMS component available for the ADAU1787 SigmaDSP ? Are there any method to reset the NLMS coefficients in runtime ? Thanks ! ADAU1787 Integrated
-
ADAU1787 in the ANC application
Hello I'm looking for any Sigma Studio example of the ANC from scratch implementation using the FastDSP core of the ADAU1787 device. Are there any available ? Best regards
-
EVAL-ADAU1467 termination resistors for SDATA_IN# lines?
Hi there, I am looking at the EVAL-ADAU1467Z-schematic for some pointers on how to start our own design base around the ADAU1467 DSP and I can't understand why you place termination resistors (R12 and
-
CRC not working on ADAU1761
Hello, I am using EVAL-ADAU1x61EBZ with the ADAU1761 chip. I want to implement the CRC functionality, but I don't get it to work. (GPIO0 doesn't go HIGH when I corrupt program RAM by sending 5 corrupt
-
Using Script
Hi, I like to create and manage SigmaStudio projects with scripts. 1. Whether there is a method to obtain the coordinates of a Schematic Block. This will have many benefits for using scripts to create
-
programming I2C peripherals on the same board as a SigmaDSP ?
I have a board with an ADAU1452 and some ADCs and DACs that are all connected by I2C to an external controller. During development I would like to control the ADC and DACs from SigmaStudio - though no
-
ADAU1787 SigmaStudio stream and record data
Hi! I work on the ADAU1787 EVAL board. I downloaded a sigma studio schematic which contain inputs, outputs and filters. I want to stream samples I have generated from matlab into the processor and rec
-
Need Help Determining Schematic Size
Hello, I'm an EXTREME newbie and trying to compile my FIRST schematic with Sigma Studio, so please be patient with me... I'm using an ADAU1701 evaluation board with the following schematic. I'm fairly
-
ADAU1452 "Single Level Detector w Numeric Display" parameters missing from System Files output
I have a project which uses a "Single Level Detector w Numeric Display" so that an attatched microcontroller can read the level. However, when I look in the exported System Files for the relevant para