EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
EVAL-ADAU1467Z Analog output issues
I have a the EVAL-ADAU1467Z for testing purposes and have set it up per manual using the "IN1" and "OUT1". This works as expected, however, I have not been able to get any output out of any of the oth
-
Misunderstanding between Coefficient table gen and independent filter changes
ADAU 1701 and Sigma Studio 3.14 on Win 7. I would like to generate a table of coefficients for a IIR filter but the numbers I see from the table generator are very different then the numbers I get whe
-
SigmaStudio export human-readable values
Dear EngineerZone, it is a long time ago i asked a similar question but the question is now closed. So I will ask again. Is there any way to export all human-readable parameters out of sigma studio, l
-
SigmaDSP to serial port output setting on ADAU1787
Hello, I am trying to configure SigmaDSP output to serial audio port output in SigmaStudio. I got BCLK0 (12.288MHz) and FSYNC0(48kHz) output as expected, but do not see signal from SDATAO0. In SigmaSt
-
acoustic feedback suppression on ADAU1452
Hi, I need to develop an AFS algorithm in ADAU1452. My algorithm prototype operates in the frequency domain so I would need the block processing and FFT functionality of the ADAU1452. However, there d
-
pid closed loop feedback control
(Beginning is extra information, my question related to the PID part) Dear forum member, I am designing a closed loop system using SigmaDSP and external hardware. Basically, we take the input signal f
-
Mixed sample rates 32k in 48k out ADAU1761 is it possible
I have a circuit that works well with 3 ADAU1761 and an additional AKM stereo A-D and a Wavefront dedicated reverb chip All works at 48k sample rate 16 bit. I am looking to integrate wireless mics dir
-
Sigmastudio multiplexer problem (ADAU1452)
Hi, I have a custom board with ADAU1452 and a uController. The DSP has 3 digital inputs (I2S), which are selected by the uC through ADAU1452's input pins. In sigmastudio there's a multiplexer that is
-
Where's all my tutorial content?
It appears that a good deal of my older "tutorial" or "FAQ" content has disappeared. For example, in this post: https://ez.analog.com/dsp/sigmadsp/f/q-a/106648/index-selectable-filters-and-probe-stim/
-
ADAU-1777 and ADAU-1787
Hi All Sorry if this has been posted before. We are currently trying to evaluate the ADAU-1777 and as such have bought the EVAL-ADAU1777Z Evaluation Board. What we are aiming to do is sample the comin
-
Stimulus and Probe not working with multiple Parametric EQ filters on ADAU1466
When using the Stimulus and Probe feature in Sigma Studio, it appears to only simulate the first filter in a Parametric EQ Filter block. This behavior is a problem when my project has the ADAU1466 har
-
Multi-purpose pin configuration for DMIC input with Eval-ADAU1787 board
Hi, I am wondering if I can use multi-purpose pin MP12 for PDM mic input (DMIC45 or DMIC67). SigmaStudio hardware configuration allows to configure MP0 through MP8 for DMIC input, but not for MP9 thro
-
"ADAU1462" actually appears to be an ADAU1466
We are working on a revision of our hardware using the ADAU1462-300 instead of the ADAU1452 we currently use. During initial testing however I discovered that it appears to behave like an ADAU1466 eve
-
DMIC setup on EVAL-ADAY1787Z board
Hi, I am trying to configure DMIC I/O on EVAL-ADAU1787Z board for external PDM microphone array. I don't see clock pulse on DMIC_CLK0 or DMIC_CLK1 pin. Also, noticed in SigmaStudio Hardware Configurat
-
ADAU145X SPDIF Plug/Un-plug Events
Hi all, I'm working with SigmaStudio and an ADAU145X processor. I'd like to be able to detect an SPDIF plug/un-plug event in the SigmaDSP (i.e. the user connects an SPDIF cable/device). Is there a way
-
how to transfer float to 8.24 format
I need help, how to create conversion function from float number to 8.24 representation format . I have connected microprocessor with SPI to adau. I'm looking for easier conversion function: for examp
-
Sigma Studio APIs
Hi, I want to interface a C# code with a software "Sigma Studio" software, this software has several APIs in a dll file located on the installation folder, the problem is that those APIs are not expos
-
ADAU1452 with 2 x AD1938 at 192kHz
We have a product currently operating with ADAU1452 as master with 2 x AD1938 codecs at 96kHz, with DACS operating at TDM8. SDATA_OUT0 goes to AD1938 #1 and SDATA_OUT1 goes to AD1938 #2. It is my unde
-
ADAU1701 in Low Power mode?
Hi all, I am currently working on DSP (ADAU1701) Bluetooth amplifier board that will be used with a 2s Li-Ion batterypack, so it would be very nice to have a standby mode or such for the DSP. Is there
-
ADAU1701 toggle Nth order filters with GPIO
Forgive me if the answer is obvious because this is only my 2nd project in sigmastudio. I want to have selectable Nth order filters using a GPIO. So far I have not used any GPIO in my project. I see t
-
ADAU 1701 change serial output port dynamicly.
Is there a way I can change the serial (digital) output port? For example, from DIG0 to DIG4. This by sending commands to registers via the I2C port? I thought about putting a SPDT switch but I am too
-
MCU communicating to ADAU1701 through I2C
Need a expert here to review or write a MCU prog for the 1701 through I2C, If anyone can help.
-
ADAU1701 with MCU STM32 fail to work .
Hi I had took the advice to use a MCU to protect the ADAU 1701 program. After we done the design and code the firmware. We build the PCB board with AMP and then we ran into the problem that the MCU is
-
ADUSB2Z 1.4 Multi Master Programming Problem
Hello, we got a uC that communicates periodically over I2C with one ADAU1452 and we have the ADUSB2Z programmer on the same I2C. This causes problems when programming the DSP because two I2C masters a
-
8in/8out system around the ADAU1466
Dear All, I am interested in a quite complex system that will have to deal with many inputs and outputs. I checked the ADAU1466 evaluation board and it seems that, by using the two remaining serial in