ADAU1962 XML project file

Hello Lisstzky,

Are you using SigmaStudio? That is what you should be using.

There is only one DLL and it is for all four possible parts.

ADAU1966

ADAU1962

ADAU1966A

ADAU1962A

The register sets are almost identical. Where they are different is mostly obvious and clicking on for instance a channel greater than 12 on a 12 channel part will do nothing and will not damage the part in any way.

The one place that is not obvious is for the common mode voltage on the "A" version parts. They cannot do 2.5V because they do not run at 5V AVDD. That register does nothing so again, no damage to the part.

Here is what you pull into SigmaStudio:

You will also most likely need the updated user guide for the eval board. email me via the company email.

Thanks,

Dave T