SigmaStudio+

Hello Eric,

Can you explain a little more?

Let me see if I can sum this up?

You want 500ms of delay total?

I assume the sampling rate is 48kHz so therefore you will need 24,000 samples correct?

So you want something like 12,000 in DM0 and 12,000 in DM1?

Have you looked at the compiler output window to see the usage and the amount of available parameter RAM?

Which revision of SigmaStudio+ are you using?

Can you include your program as well to demonstrate the issue?

Thanks,

Dave T

Hi Dave，

SigmaStudio+2.1&2.2 same problem.

As shown in the following figure, the DM0/DM1 RAM occupancy displayed by the compiled output serial port is inconsistent with the design

Thanks,

Eric

Can you include your program as well to demonstrate the issue?

I took the time to recreate your test and came up with different results.

Dave T

D:\2024\DSP\ADAU1452DEMO\ADAU1452DEMO.zip

However, the total delay of DM0 and DM1 still cannot exceed 24000samples(500ms)

Hello Eric,

It does not seem to be the actual file attached, only the name and path. Did you drag the file into the reply window? That usually works.

Dave T

Sorry, the attachment is attached this time

ADAU1452DEMO.zip