ΣSigmaStudio Ask AI Русский Log in

ADAU1772 analog input protection

SigmaDSP & SigmaStudio RMSacoustics Apr 5, 2016 00:00 2 replies Original on forum ↗
Subscribe
RMSacoustics Question
Apr 5, 2016 00:00

I use the ADAU 1772 in a non-portable circuitry that is supplied with regular +\- 12V supplies.

The ADAU1772 itself is supplied with 3.3V.

This means that the op-amp that precedes the ADAU1772 analog inputs can deliver much more voltage than the analog inputs can handle (Vcc+0.3 - GND-0.3 V).

Now my question is whether the inputs are protected by diodes such that I can prevent overload by a series resistor, like with many C-Mos devices. And if so, what current can these input protecting diodes handle?

thanks, Rob

adau1772

Integrated/Special Purpose A/D Converters

Audio CODECs

DaveThib Reply
Apr 6, 2016 00:00

Hello Rob,

I am actually not sure what the current rating is on the protection diodes. Yes , they are there but we do not recommend using them for input limits. I will see if I can get a better answer for you but I would consider some external diodes.

Dave T

RMSacoustics Reply
Apr 6, 2016 00:00

I saw in the specsheet an absolute maximum rating for the input current of 20 mA excluding supply pins. If this is the max current over the input diodes I can work with a series resistor to get a little bit more margin.

external Schottky diodes are possible but if they can be avoided it is best.

so I hope you can find a better answer.

thanks,

Rob