During debug exception

gkrao Question

Jul 27, 2018 00:00

I'm using BF-609 in one of our Hardware. After Power ON,the JTAG has been connected to the Hardware and passed the jtag configuration test (scan path) but during debug we got the exception (as attached) at the very first at adi_initComponents() and the application has been halted. I have tried the following options i.e 1. Cleaned and re-built the project. 2. Created new project in the new workspace with default settings of BF609 ,built and loaded using ICE-2000 emulator. I had tried with new project with empty code(just c code with simple for loop) as well as with the available examples provided in the CCES IDE (1.1.0) with our Hardware Card in different workspaces but the code is generating the same exception at the very first at adi_initComponents(). Please post the solution to this exception.

Report

Jithul_Janardhanan Reply

Jul 31, 2018 00:00

Hi GK Rao,

An SR has been logged through private support for this issue, and will continue to be dealt with through that channel. We will post the outcome here, if appropriate.

Best Regards,

Jithul

Report

battularamanareddy0@gnail.com Reply

Jul 31, 2018 00:00

Dear Janardhan I have posted this question so many ways but can't get any

solution

I hope u solve my problem

We are trying to load two .ldr files (one .ldr file for system software

with customized kernel, another .ldr file application software with default

kernel) through EPROM (Externel Port), the 2 ldr fil;es in different

sectors of single flash memory.

We are in the process of customizing boot kernel.

Here, we are trying to load two .ldr files, based on the flag_0 IO pin

status.

We need support regarding the placement of the second ldr’s flash base

address in boot kernel file.

If not FLAG0_IN jump (pc,3);

ustat1=0x410600; //2nd .ldr’s base address.

dm (EI6)=ustat1;

Note: We referred EE – 345, EE – 56 and my.asm attached.

Please do the needful as early as possible.

regards

Ramana

>

Report

battularamanareddy0@gnail.com Reply

Jul 31, 2018 00:00

On Tue 31 Jul, 2018, 7:01 PM ramana reddy, <battularamanareddy0@gmail.com>

Report

Jithul_Janardhanan Reply

Aug 2, 2018 00:00

As we are dealing this query through private support, please continue the discussion there to avoid duplication of effort.