EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
ADAU1772 I2C address-difference between datasheet and evalb user guide
Hi, ADAU1772 datasheet shows I2C address configurable between 0x3C and 0x3F, but it can't be set to this range on SigmaStudio. Instead, UG-477 user guide for ADAU1772 eval board, shows in figures 46 a
-
Can I get ready solutions on ADAU1467 in Sigma Studio for Noise Cancellation?
This it test ADAU1467 whether it can help to build a mic array.DaveThib Audio Signal Processors adau1467 SigmaDSP Audio Processors
-
Manually generate sequence file
Hello Everyone, For my project I would like to read the coefficients from my DSP via a microcontroller and import them into Sigma Studio as a sequence file (please see Import Parameter to Sigma Studio
-
Sequencing separate regulators for AVDD and IOVDD for ADAU1761
I plan to use two ADP7104 (3.3V) regulators to power the AVDD and IOVDD separately on an ADAU1761, is this possible? If yes are there any restrictions on power sequencing, e.g IOVDD has to come up fir
-
Import Parameter to Sigma Studio
Hello Everyone, In normal operation the DSP parameters in my project (ADAU1442 and ADAU1452) are set by a microcontroller. I can read them back from the DSP and store them to a file. When I connect to
-
PROGRAMMING ADAU1701 NOT IN-CIRCUIT
A customer for whom I did a project with ADAU1701, has always programmed the DSP in-circuit. It has to increase production and asks if it is possible to program the DSP before it is assembled in the P
-
Please help me
Please help me build a 2 way audio speaker system fuction 1: high pass filter 2 : bass boots 3 : vocal boots 3: GPIO Output daylay mute AMP 4: apply signal limiting with led Indicator 5 GPIO Output de
-
Power supply for the ADAU1701-MINI evaluation board
I'm connecting a USB audio device that outputs I2S (the Texas Instruments PCM2707C) to the ADAU1701 (the evaluation board). I have a simple SigmaStudio project that routes directly. I connect my headp
-
Real Time Variant and ADAU146x
Hi there! Why Real Time Variant doesn't work with ADAU1462 (and with all ADAU146x too)? The VariantEditor is not opening. With ADAU1452 all is Ok. I use the SigmaStudio 3.17, Win10 64. Best regards, K
-
Sigmastudio V3.17 compatibility issue
Hi, I seem to have found a bug in Sigmastudio 3.17. It's not compatible with any of the previous versions. I can load a file created by 3.13 into 3.17, but if I output a file from 3.17 then I can't re
-
Communication between MCU and ADAU1701 DSP
Hello everyone, I am using the ADAU1701 mini evaluation board and I would like to know whether or not this is possible to communicate with an arduino or a STM32 nucleo via I2C or SPI. I also don't wan
-
ADAU1452 SigmaStudio IIR filter table gen
Hello, I set coefficients directly for the IIR filter, but I can not set it well. I loaded the coefficient value entered in the text in advance by "Load" button, but the setting did not go well. Pleas
-
ADAU1467 Sample rate converter problem
I am facing a strange problem with the ASRC in the ADAU1467 ( system sample rate is set to 192 kHz). If I apply an audio signal to the SPDIF input with 192 kHz, it does not work. As soon as I slightly
-
SigmaStudio Mixer Errror
I have been using the ADAU1452 for years. Sigma Studio has a serious bug in NxM Mixer. I confirmed using Sigma Studio version 3.17, but the result was the same. Bugs in the NxM Mixer vary with the num
-
Hi. Is it possible to connect I2S on three wires: LRCLK, BCLK, DATA, when using an internal oscillator? In this case, the signal from the ADC is lost, there is noise at the DAC output.
Is it possible to connect I2S on three wires: LRCLK, BCLK, DATA, when using an internal oscillator? In this case, the signal from the ADC is lost, there is noise at the DAC output.
-
No sound on ADAU1467 eval board
Hello, I just received my eval board ADAU1467 but i can't have any sound. Maybe i forget something. I connected Audio in ch 32-33, USBi to my computer to a USB 3 port, and a speaker on out Ch 0-1. Whe
-
Need help with interfacing CS8416 with ADAU1701
Hello, I want to know if I can interface CS8416 with ADAU1701 even though the ADAU1701 does not have an ASRC. Here is what I am proposing and I would appreciate if anyone can confirm or otherwise if t
-
ADAU1467 , How to adjust the delay time to 1600ms?
Th ADAU-1467 .... manual says that 48 kHz digital audio delay times can be up to 1600 ms, but currently only 800 ms. How can I adjust to 1600ms (sample 48KHz)? Audio Signal Processors adau1467 SigmaDS
-
What is delay time of EVAL-ADUSB2EBZ ?
Hello to all, I have quick question - what is delay time of line USB_PWR_ON of EVAL-ADUSB2EBZ after switch on what control ADG721BRMZ and others ? Thank you. Audio Signal Processors adg721brmz eval-ad
-
SigmaStudio's Bessel filter coefficient operation inquiry
Hi all One of the customers is developing the product by applying ADAU1452 to the product. There are inquiries about Bessel filters in the filter. If measure another manufacturer's equipment in the Be
-
ADAU1462/1466 data sheet, several issues.
I am referring the latest ADAU1462/1466 data sheet Rev.C. Please let me confirm below. If there are document anomalies, could you modify them in future? 1. Digital Input voltage, no noise margin Is fo
-
Voice conversion in ADAU1452
Hello Everyone, I'm using ADAU1452 Audio DSP Processor. We need to convert a husky voice to general voice. How can we convert a husky voice to either male or female general voice in ADAU1452. Please h
-
ADAU1777 problem with parametric EQ
Hi everybody, my first problem that i would like to discuss in the engineerZone is the following: -ADAU177 devBoard successfully connected under Windows10, -input straight to output works. -Likewise,
-
I want to build a mic array. Can I use ADAU1467 for that?
Does ADAU1467 support in-built algorithms for noise cancellation, echo cancellation, beamforming which are required to build mic array?
-
Changing data in read/write interface is not reflected in WB/WP pins
Hello, if I move my encoder knob connected to up/dw counter provided with read/write interface, the WB and WP pins don't reflect any signal. So I think that nothing is witten in the eeprom. Using my s