EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
SPDIF Receiver lockbit detection failure with Software 3.17?
I realized a problem with files that have been created with the latest 3.17 software version in combination with the Sigma300 ADAU145x series. The SPDIF receiver lock bit detection always indicates "S
-
how to limit upper value of index up/dw counter
I've found no way to limit the up/dw index upper value. The LUT that follows will limit but the counter continue to go up. If you turn the encoder clockwise, over the accepted value, you need to turn
-
how to reset to zero the index selectable demultiplexer?
I need to reset to zero the index selectable demultiplexer after some time this function is unused. There's some trick to do this? I don't find any simple method to make this task. Thanks in advance,
-
Can ADAU1467 be used to build microphone array?
I want to build a mic array. Can I use ADAU1467 for that? Is it pre-programmed or graphically programmable?
-
Controller for ADAU1452
Hi Everyone, I am using ADAU1452 audio DSP Processor. We need a controller to program ADAU1452. Which controller is suitable for programming ADAU1452. Please help. Thanks & Regards, Sri.
-
ADAU1452 doesn't selfboot
Hello, I have designed a device with the adau1452 and a 24aa512 eeprom as selfboot memory. the circuit has a pic microcontroller in it which controls the boot sequence of the device but cannot be used
-
Sigmastudio export error adau1761
Hi. It appears that some errors in exporting the registers has occurred in the later versions of sigma Studio. 3.15 and 3.17 exports any reserved bits as 1 and not 0. Ie /* Register Default - IC 1.Clo
-
Serial Audio Interface to EVAL-ADAU1777
I am attempting to bring up a serial audio interface to the EVAL-ADAU1777, and would like to post my approach and glean any advice or expertise from others who have blazed this trail. Products from Mi
-
ADAU1442 ASRC won't work at 192kHz
I have a new product that uses the ADAU1442 running at 48kHz. The OEM that is building the hardware is having trouble with the ASRC handling of 192kHz signals on BOTH the S/PDIF and the TDM-4 input pa
-
LowPass Filter coefficient calculation
Hi all, I am checking the Low Pass Filter coefficient to use on my micro-controller, I have researched some topic, like https://ez.analog.com/message/21166?commentID=21166#comment-21166 and the wiki:
-
4 Digital input SPDIF
I have started the development of an audio mixer with 4 digital and 4 analog inputs. I have plan to use a ADAU1442 The outputs ar I have started the development of an audio mixer with 4 digital and 4
-
Сhannel for a subwoofer or how physically combine two channels with DSP
hello everyone for my project I want to buy amplifier with DSP (ADAU 1701) by Sure audio. I need 50 W Rms 4 ohm. But it must be ''honest'' 50 W Rms. There are two possibilities 2 x 50 Watt Class D (4
-
ADAU1701 upsampling+DF
Hi all, i am working on a ADAU1701 project that use IIS input(slave) and IIS output(master), DSP core always run on 96kHz 512instuction. But input sample rate can be 96kHz and 48kHz. When 48kHz come f
-
ADAU1777(1772) stand alone codec.
Hello Can I use Adau1777(2) as a smart stand alone (mic preamp, a few filters+limiter) codec with I2S -4Wire interface (common clock LRCK, BCLK, separate data SDI, SDO) as in the picture? Is it possib
-
Does divide component adau1450 ceil and/or floor outputvalues?
Hi All, Where can I find what happens when I use the divide component in the adau 1450 and input 0.05 on the Dividend (pin 0) and 0.000001 on the Divisor (pin 1) ? the result would be 50000, only 8.24
-
Can I Open two project so I can compare them.
I had some old projects and I want to compare them. But I cannot open two sigma studio!
-
ADAU1701 ADC mute EQ
Hi all! I'm new in community and I'm designing a new board using ADAU1701 in self boot mode with E2 no uC saving cost. I've some questions or better some doubts with Sigma Studio. 1) Sending in ADC an
-
ADAu1466 with I2C Selfboot memory and PCF8574 IO Expander
Hello. How to configure ADAU1466 for I2C selfboot and external IO Expander PCF8574? First I would like to use PCF to change input source for codec, and second reason to use I2C is delay setting for TP
-
ADAU 1701 + Automatic EQ = Compile fail
Hello, I'm on a simple project, based on the ADAU 1701. Trying to use the Automatic EQ tab, I have a problem when I "Link Compile Connect". I get this message : Comipler Error, Please contact ADI. Sys
-
Simultaneous serial audio and digital microphones on ADAU1777?
From the data sheet for the ADAU1777, it is clear that the input path can accept analog microphones, digital microphones, and serial audio inputs. I have successfully brought up designs on the EVAL-AD
-
How to eliminate feedback in ADAU1701
Hi everyone, I am using ADAU1701 for the application Voice Processing. Everything is working fine. But our problem is while speaking via microphone it is fine, but when it is in normal position we are
-
LAYOUT EVAL-ADAU1701MINIZ
Hello everyone, some of you know where to find the layout containing the various traces of the printed circuit of EVAL-ADAU1701MINIZ Thanks Piero Audio Signal Processors eval-adau1701miniz adau sigma
-
Capture sound output on a simulation
Hello everyone. I'm completely new to SigmaStudio. I need to simulate the input/output of the DSP with the built-in simulation, since I don't have the hardware (yet). I'd like to have an input, i.e. a
-
USBi comm error with Windows 10
My Win 10 laptop is no longer on speaking terms with my USBi / eval boards, resulting in Comm errors and nonworking readbacks.. My work computer worked fine until as an experiment I deleted its USBi d
-
Oscillators stops running without any warning
Hi, needing to output an hardware flashing led , I thought to use the output square wave block. It works perfectly. But, after designing more functions using other bloks modules, the square wave block