EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
ADAU-1452 serial out to AD9957 Blackfin input
I need to format I/Q data from the ADAU-1452 as two 16-bit serial inputs to the AD9957 QDUC operating in "Blackfin Interface (BFI)" mode. The I and Q bits from the ADAU-1452 need to arrive at the AD99
-
Multi-channel beamforming and frequency-domain analysis on SigmaDSP
Hi folks and analog devices administrators, I'm new to digital signal processors and I'm trying to evaluate SigmaDSPs for multi-channel beamforming and frequency-domain analysis as described: - 8ch @1
-
Waves plugin question
Hi, i read on some other post, there is a ported version of waves plugins for sigastudio. I just wondering, how can i know with what DSPs are supported? I'm planning to use the ADAU1467, is it possibl
-
Fractional Voltage Controlled Multi TAP Delay ADAU1466
I'm quite new to AD DSP and have recently acquired a 1701 evaluation board and a 1466 Evaluation board. I'm trying to use the Fractual Voltage Controlled Multi Tap Delay, but I can't get my head aroun
-
ADAU 1701: lost I2C connection
Hi at all, in my application the ADAU 1701 is working as a slave with a uC. The first prototype worked properly for some days at my desk. Then some connection problems started. I had to reconnect many
-
Register fixing
There is a way to fix the register address? If a modify a project every time the address of the previous registers is changes so I need to change in in the define of the microcontroller.
-
PLL Enable/Disable not working when selfbooted
adau1452 i2c selfboot Hello Community, we are having problems when trying to disable and re-enable PLL after ADAU1452 has self booted through I2C eeprom. Here is a brief description of my project: I b
-
What is the best AD Integrated circuit to start developing Guitar and Voice effects?
Hi to all, I'm an electronic developer and audio designer, I'm looking for start to modeling audio processors for guitars, bass, keyboards and voice. I'like to use Sigma studio to do this. What's the
-
ADAU1452: Is a clock with 1% duty cycle allowed as input clock?
Hello, I input 750Hz pulse (Hi Duty = 1%) signal from External Device to ADAU1452. I configured ClockGenerator3 but LRCLK and BCLK didn't output expected signal. Outputted clock stops sporadically. Do
-
can ADAU1701 SDATA inputs be pulled low?
Hi, I am working on an application where the ADAU1701 is receiving serial audio data on Multifunction Pin 1 that has been configured as serial audio data input. It seems that this pin is always pulled
-
SigmaDSP Rev. 3.16.10
SigmaDSP Rev. 3.16.10 Where can I find fixed beamforming description?
-
AD1938 Configuration: ADC sample rate 44.1KHz, DAC dample rate 192KHz
Hi, I would like to configure AD938 with 2 samples rates differents for ADC and DAC. AD1938 is use as slave, MCKI is 12,28MHz. I use DSP 584 for the configuration. How i can configure PLL registers to
-
ADAU1401 or ADAU1761 for echo cancelling
Hi, I need to design an echo cancelling circuit for a customer. I would appreciate if someone can tell me if the ADAU1401 or ADAU1761 are appropriate for such application. Is the sigma DSP inside thes
-
ADAU1452 Transfer function is not working
I note in release 3.15 for the ADAU1452 there is know bug #5. "5. Transfer function is not working for Parametric EQ, when multiple filters are added for ADAU145x" My design uses many Parametric EQ as
-
ADAU1701- Question of making a adjustable Phase control
Hello everyone, I have searched the related question in the forum, and I found this topic: How to use sigmastudio software to realize an external potentiometer to control phase, the phase of the range
-
No output from ADAU1452 Master Control Port IO
I'm using a Master Control Port IO Ext. Trigger cell to write to a SPI peripheral. The schematic generates SPI output Mode 3 but no output (no SCLK) if I switch to Mode 0. I've attached a simple schem
-
Is there a sigma family with built-in eq features (more than 4 bands)?
Is there a sigma family with built-in eq features (more than 4 bands)? It does not matter whether it is a Codec ic or a DSP ic.
-
ADAU1452 I2C transaction
Hi there, Is it possible to split the DSP Program data or Parameter data into more than one I2C transaction? If yes, how to do it? Kindly please advise. Thanks and best regards, Keddy Audio Signal Pro
-
Compile error ADAU1452 Master control port SPI
I'm trying to use the Master Control Port IO block in SigmaStudio v3.15 build 3. The release info for 3.15.2 beta says it's supported: "Master Control Port Runtime Sequential Write and Master Control
-
ADAU1442 S/PDIF breaks between two boards
We are experiencing strange S/PDIF lock issues with a custom ADAU1442-based board, but only when connecting S/PDIF I/O between two of these boards. A brief summary: S/PDIF from 3rd party source (e.g.
-
Pro audio device DSP IC advice
I´m going to design a standalone HW audio processor. Basically a limiter that will include additional features such as eq and filter per channel, additional channels, individual phase correction, etc.
-
Clock Powerup timing
I have a design using ADAU1452 processor, the power for which may be turned on/off by a control CPU. The XTALIN pin is driven at 24.576MHz from an FPGA which also runs from the same on/off power lines
-
SigmaStudio won't start on Windows 10
Hello, I am preparing to migrate to Windows 10 and have it set up as dual boot with Windows 7. I discovered that .net3.5 needs to be installed separately on Windows 10. On doing so I installed SigmaDS
-
1701 MCLK requirements
in the ADAU1701. Can the BCLK on an I2S be on a different phase than the MCLK? The I2S is slave. The BCLK origin clock is internal to the I2S master. 1701 get's another clock source at MCLK. Is it val
-
ADAU1452 load by microcontroller
Our product has a microcontroller connected to the slave port of the ADAU1452 which connects to a AD1938 codec on a board of our own design. For quite some time our microcontroller firmware is able to