EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
[Bug Report] ADAU145x multi rate problems
SigmaStudio version 3.13 Windows 7 Pro 64-bit Service Pack 1 I am seeing some really strange behavior with the new mulitrate blocks on an ADAU1451. I created a small project to show the issue: The Sig
-
Bug in sigma studio with adau1401/1701 running on 96khz?!
Hi, While making a sigmastudio file on a ADAU1401 system with external ADC and DAC, with the DSP as Master I found a very strange phenomenon. Included are 2 screenshot showing my design with the sigma
-
eval-adau1701 hardware and latest software usb driver issue
I'm trying to resurrect a project using some EVAL-ADAU1701 eval kits from 2011. I have used them in the past with Ver 3.11 and everything was fine. I have loaded version 3.12 and 3.13 beta and the USB
-
AD1938: FILTR pin question
Hello, i'm not using FILTR reference voltage in my project, do i still need to connect external filter caps to this pin? Thank you ad1938 Integrated/Special Purpose A/D Converters Audio CODECs
-
Where are the multi rate blocks?
I see other posts of people using the multi rate blocks for the 145x, and they are also listed here. I have the latest version of Sigma Studio installed (3.13), but I don't see the multi rate blocks a
-
Live update of SigmaStudio screen
Hello Dave, Quick question: Will SigmaStudio controls (volume controls, filter settings etc) update dynamically (visible on the screen) when an attached MCU writes updated values to the corresponding
-
How to set silicon version ?
My SC589 silicon version is 0.1, shoud i setting processor setting to "0.1" or set "any"? THE CCES2.3 directory have a file is named "preload_v01.ldr", if SC589 silicon version is 0.1, Should i select
-
Adau1452 default registers setting
Hi, i happened to hit the read all registers button in Sigma Studio with usbi disconnected and my adau1452 board stopped working. Is there a simple way to reset the registers back to default setting?
-
ADC ADAU1978 TDM mode with DSP ADAU1452 - VR volume control THD issue
Hi all! I am trying multi-channel setting, My testing enviroment : ADC: ADAU1978, TDM mode (TDM16), DSP: ADAU1452, DAC: ADAU1962 (only one DAC) Volume control: Variable Resistor(VR) The TDM mode setti
-
Adau1452: Safeload Write with Arduino through SPI
Hi there! I built an ADAU1452 based proto board, it works great but i'm experiencing problems while trying to send safeload writes through SPI with Arduino. The Arduino is the Nano 3.0 with a CD4050 n
-
About Sigma300(ADAU145x) core architecture.
Hello all, Could anybody provide me a block diagram of the ADAU145x core architecture please? The data sheet says that the DSP consists of 4 MAC cores and the processing ability is about 1.2 GMAC. I w
-
Which approach to take to implement a 64-channel ASRC?
I need to implement a 64-channel ASRC (actually, two of them, because my application is bi-directional). I was looking at using a total of eight ADAU1445 units glued together with some FPGA logic, but
-
multirate and DC source
Hello everybody, i'm using the multirate blocks on adau1452 and i noted that the project cannot be compiled and stops with an "invalid samplerate detected" if i use any DC source. More in detail, it s
-
ADAU1761 MIC Gain
Hi I am using ADAU1761 mated with BF707 EZ-Kit. Capturing the data using the on board MICs stereo 44.1kHz sampling. But the captured data volume is very low, when dumped to a file and verified in the
-
ADAU1761 PLL lock
Hi, My customer is using ADAU1761 for BT handsfree application. They encountered PLL lock issue. Some unit can detect PLL lock. Some can not. What could be the possible reason lead to such problem? I
-
ADAU1761 DC gain in the digital mic path
Hi I am working on analog devices ADAU1761 audio codec chipset. Capturing the data through digital mic path and dump the same to a file for the further analysis purpose. During this process, HPF (ADC
-
Linux Driver for Sigma Studio
Hi, all I would like to get "Linux Driver for ADAU1442" Do you have a linux Driver for ADAU1442? If it possible, how should I search the driver? Thank you so much. Audio Signal Processors adau1442 Sig
-
ADAU1452 FFT and IFT info and use...
Hi: I am developing a project using the ADAU1452 and wish to use the FFT and IFT, but can find no information, examples, etc. Help please... Thanks, Gary Audio Signal Processors adau1452 SigmaDSP Audi
-
External LED Array Driver block?
I would like to use an external LED array to show the in- and output level in my dsp project (ADAU1701). I found an intresting block in the sigma studio wiki (External LED Array Driver) but it says "T
-
ADAU1761 self-oscillation in a megaphone
I use ADAU1761 as Microphone pre-amlifier and signal processing for a megaphone project. System total gain is about 36dB. it get horrible self-oscillation when speaker sound feed back to MIC, How can
-
ADAU1977 Evaluation GUI Crash
Hi Sir, My OS is Win7 Pro 32bits version but I encountered some questions when run ADAU1977 evaluation software GUI. And I've tried to installed in on three computers but all problems are the same. Th
-
ADAU1701 AUX controlled "graphic EQ" possible?
Is it possible to design an eq with fix frequency and Q and make the cut/boost variable with an external potentiometer? I want to use the four aux analog inputs to controll some fixed frequencies live
-
Development kit for 2.1 Stereo System
Hallo Everyone So for my earlier project i was using the ADAU 1452 Miniz Evaluation Board as i was designing a 5.1 system. For my next project i have to design a small 2.1 system. So i am looking for
-
Mute compressed audio
I am using an ADAU1452. When the DSP receives compressed audio, e.g. AC3, on the S/P-DIF interface a nasty noise is heard. I would like to mute the DSP when compressed audio is received. Muting ASRC w
-
Why do I see only 5 coefficients change when I adjust Medium_Size_EQ?
I'm using the Medium Size EQ block and noticed that only 5 PRAM coefficients change when I move the sliders. The wiki documentation says these are General 2nd order filters but the equations for said