EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
ADAU1761 Expander Issue
Hello I have use ADAU1761 to design our new product , but I have some question about expander function. I try expander function discovery that over threshold the signal gain can not to increase. Is it
-
Idx Selectable Indp. Multiple Band Filter doesn't allow Peaking Response
Hello, The Index Selectable Independent Multiple-Band Filter helps to save instructions when a choice of filter arrangements is needed, as described in the wiki: https://wiki.analog.com/resources/tool
-
filter editor window button not shown
I'm just starting back on SigmaDSP. I picked the 'index selectable filter' GPIO project to get my feet wet. The example links and compiles but I don't get the red filter button on the schematic to ent
-
Re: resource usage?
EDIT: This was in answer to https://ez.analog.com/message/114819#114819 -- I'm not sure how it ended up as a new post. -- Bob Hi tonyc, The rightmost of the three buttons you do get opens the filter w
-
BC857 as a 1.8 regulator transistor for adau1701
Hello everybody, I have been making the schematic for my own 1701 board (yay yay). But since I am not an engineer I am awfully afraid of making any mistake. So I chose BC857 as a 1.8 regulator transis
-
BC857 as a 1.8 regulator transistor for adau1701
Hello everybody, I have been making the schematic for my own 1701 board (yay yay). But since I am not an engineer I am awfully afraid of making any mistake. So I chose BC857 as a 1.8 regulator transis
-
AB in CD out Headroom Issue?
I'm running Sigma Studio 3.8 and using the ADAU144x part. In working with the AB in CD out Condition module, I've run into what looks like a headroom issue. I stand/beg to be corrected here, but based
-
Understanding ADAU144x audio routing to AD1937
Hi Guys I have been looking at the routing matrix today and its pretty heavy going. What i want to do is take a single channel input from one of the ADC inputs and send that through processing in the
-
ADAU1761 Power Consumption
I am trying to come up with some rough power estimates for power consumption on the ADAU1761. The datashee has great info for the ADC and DAC, but no info to help in predicting consumption in the DSP
-
MATLAB SOS matrix to cascaded IIR blocks for higher order filters
I have been trying to implement a filter I designed in MATLAB using the 2nd order IIR blocks in SigmaStudio but with no luck... I found that MATLAB's filter design tool will output a filter in a matri
-
how to properly set the settings in real time display graph
Hi, I am using real time display graph to plot sine tone freq=500hz. but I am not getting the correct output in real time display graph? I am getting spikes instead of sine wave. I just want to know w
-
low swing clipping on ADAU1702 output
Hello, hope someone can help on this. We have the sigma ADAU1702 running on our PCB's and we have two designs using this processor, The differences on the designs are larger amplifiers and more of the
-
Odd Behavior For Odd Numbers
I have found somthing strange things when trying to read an odd number from a register using the SigmaStudio C.O.M interface. For example: I wrote 3 to a register from SigmaStudio, SigmaStudio said 3
-
something on compressor/limiter blocks
Hi everybody, i have some questions on the compressor/limiter blocks in sigmastudio. I quickly tried to play with them once got the demoboard, then i used it for other purposes but now i need to use t
-
SimgaStudio Everything Went Into A Corner?...
I opened SigmaStudio 3.8 this morning (and SigmaStudio has been like this all day but I have managed so far) and found that all the tool - bars, logs, ect. decided to go into a corner: I also am getti
-
FIR and general filtering on ADAU1701. Hints about fixed point arithmetic!
Hi everybody, I'll show you what I've done and what results I got. Aim Exploiting ADAU1701 to correct a loud speaker frequency response (from 40Hz to 1000Hz) in order to make it as flat as possible in
-
Format For Data In 1772 Registers
Good day, I am trying to read data from a ADAU 1772's registers' through a C.O.M interface. I a mostly a high - level software person and am unfimilar with the kind of data I that was presented (a bin
-
ADAU1442 master of two sample rate domains
I have the following configuration SDATA0 - 16KHz Sample Rate - ADAU1442 is Master - Flexible TDM SDATA1 - 48KHz Sample Rate - ADAU1442 is Master - TDM2 SDATA2 - 48KHz Sample Rate - ADAU1442 is Master
-
1940 hot problem
hi, I'm using the ad1940 in my system. In my system, the 1940 's sample rate is 96k. Number of instructions used = 750. At the start of the work, it working well.But after a period of time,the tempera
-
NLMS block in sigmastudio
Hi, I am working on ANC project. I am trying to implement FxNLMS on ADAU1446 evaluation board. I am thinking of using NLMS block available in sigma studio to estimate the secondary transfer function o
-
SigmaStudio ADAU1701 multiple White Noise Sources correlation
I am using 4 white noise sources with seed and the application requires them to be uncorrelated. When using SigmaStudio to control the ADAU1701 DSP through the USB interface, the sources output the sa
-
a dummy question about pll in 1701
Hello people, I am going to build my own board with the adau1701 so I have been violently reading through the datasheet. The thing is I am a bit confused with PLL settings. In the paragraph "setting m
-
Moderation Issue?
Hi Guys, I cant seem to reply in private discussion, it says my post needs to be authorised by a moderator?
-
Sigma Studio Connecting Lines Some Yellow Some Green?
I am running a design with 3 ADAU1761 chips and Using several Heirarchy Boards. Some of the connecting lines show Yellow, some show green? Not really a problem perhaps, but i would like to know what t
-
I2S between AD1401 and AD1940 eval boards
Hello, To experiment with I2S audio transfer, I wish to run I2S from a EVAL-ADAU1401AEBZ (master) to a EVAL-AD1940AZ (slave) Does this chart show the correct I2S wiring? Will the USBi mod described he