EngineerZone Forum
Q&A from Analog Devices EngineerZone: SigmaDSP/SigmaStudio and DSP discussions (5719 topics).
5719 topics · 27691 messages
-
Eval-Adau 1701 miniz / Sigma studio frequency
Hello, I chose and I bought your device for my project. I need help with your software Sigma studio. I have high school project about this analog device. The input devices I have connected the generat
-
Cheap square root via "op-amp"
SigmaStudio's square root block provides an immediate sample-to-sample output. Because it must come up with a result for every sample, however, it uses many instructions. If your application needs a s
-
Connecting more that one pot to 1701mini board?
Hi guyz! The idea is the 1701 mini board has a pot which can control the volume or whatever. The idea is I need to control two more things. So is it possible to connect 2 more pots to 1701? Could you
-
Read ADC value and store it?
Hello, Is there a way to read back the ADC value continuously with ADAU1701 dev kit and store the data somehow so that it is easier to investigate later? Clicking "ReadBack" button and writing down th
-
How do I use GPIO level to index selectable multiplexer ?
Hello, I am checking EVAL-ADAU1701MINIZ. It checked changing a path by the method which BrettG introduced. https://ez.analog.com/docs/DOC-2661 When there are two audio processing paths, A and B, can i
-
ADAU1701 DAC output distortion
I am using the ADAU1701 in my project.I have some trouble. As shown.(DAC output)。CPU send the Sine wave (1 kHz) to ADAU1701 by I2S. Audio Signal Processors SigmaDSP Audio Processors adau1701
-
Adau1761 - Crc and Watchdog
How do you calculate the watchdog value? I noticed that other processors expose and program counter that maybe used to calculate this value but the 1761 does not. I tried playing with this value by pu
-
graphic wave and frequency response
Hello everyone I am PaBLo8@. I'm not good with English so I am using a translator, I hope you understand me. I'm doing my thesis on audio, and I found the "MINI BOARD EVAL AD1940 SigmaDSP". So I'm loo
-
AGC for ADAU1761
Hello, I'd like to implement AGC (Automatic Gain Control) for ADAU1761 or ADAU1781. I think AGC is same as Automatic Volume Control which was in ADI tool box. Is it correct? And I could not find the d
-
96khz with EVAL-ADAU1442
Hi I just started using the EVAL-ADAU1442EBZ, could get audio through (analog in / analog out) as well as use the S/P-DIF in-out (including ASRC), but only with 48kHz - if I change the sample rate to
-
What is "optimized dat"?
When adding an algorithm, some have "optimized" or "optimized dat" and others don't. What does that mean? I can't find anything in the documentation about it. algorithms sigmastudio
-
control 2nd order filter freq. from external POT on aux_adc
I think this should be simple but I have not found how to do this. Looked through AN951 andthe posting to date and can not see this. Maybe I have missed it as it seems a basic application. I need to i
-
Is Bessel filter linear phase?
In the General 2nd Order block, you can select a Bessel LPF. Is this digital Bessel filter generated using bilinear transform or some other transform? As I understand, the bilinear transform does not
-
ADAU1446 ASRC
Dear ADi Experts I'm struggling with my project based on ADAU1446. Unfortunately I don't have any development board, only my target device... Project is much more complicated than showed in examples o
-
Pop noise with activated ASRC
Hi there, I have a question regarding the sample rate converters in the ADAU144X family. If I connect a digital source during the DSP is running ("hot docking") I have severe pop noise on the outputs.
-
Complete description of all SigmaStudio algorithms?
Hello, Is this available somewhere? Would help a great deal for someone just getting started. Some of the settings are not trivial... Thanks!
-
A BUG somewhere ... either "Capture Window" or "Export System Files" is wrong
Hi everybody, I'm using Sigmastudio 3.8 with an adau 1701, and have been working with it for some time. Being ready to implement some external biquad coefficient calculation and to write them inthe DS
-
Is it possible to attach 4 digital mics on a ADAU1781?
Hi there, the ADAU1781 has two analog microphone inputs LMIC and RMIC which can also be used with two digital microphones, each. My question: Is it possible to use all 4 channels within the processor
-
ditigal input and output connection for adau1761
Dear ADI experts, I'm trying to apply some digital audio processing with sigmadsp, initially working on a EVAL-ADAU1x61EBZ board. The signal flow would be like: raw I2S digital data --> adau1761 I2S i
-
ADAU1701 Loading Procedure
Hi all, I am working on removing the EEPROM (cost reduction) from a my project that is currently working in self-boot mode. I was hopeful that I could write the Program data and then the Parameter dat
-
How to extract maximum value from "Max and Hold" for calculation?
Hello, I'm using 'Max and Hold' to find the maximum value of the signal between two zero crossings and that works. Now I need to use that maximum value to scale another signal accordingly. The other s
-
Changing SigmaStudio equalizer 'Boost' levels from MATLAB
Hi! I'm trying to set the 'Boost' values of a SigmaStudio Medium Size Eq in an existing project from MATLAB. For this purpose I've set up SigmaStudio as a MATLAB COM server. MATLAB script: cd 'C:\Prog
-
ADAU1701 Aux_ADC input circuit.
Hi everybody. I've got an ADAU1701, I'd like to use one of auxiliary ADC through MP pins. I read from Datasheet about input circuit to ADC Sigma-Delta but nothing about Aux ADC. Known specifications a
-
Help on "Max", "Max and Hold", "Max Abs" and "Max Abs and Hold"
Hello, Can't find anything on these in help file. How they differ, how they work? There are other algorithms also without help. Considering that Analog was able to put the whole platform and tools tog
-
self boot problem with 1701
Hi to everybody The hardware that I have built is exactly equal to that of EVAL-ADAU1701MINIZ, but I doesn't succeed in making the BUT. I write in circuit the eeprom and I correctly read her using Sig